
Re: Ubuntu Studio 13.04. Nikon Coolscan5
Via Synaptic installerade jag sane, sane-utils, libsane-extras, men där lsusb tidigare hittat min usb-scanner (men GUIn inte känt av att scannern var inkopplad) fick jag nu istället
Kod:
edfast@Studio-Z68ITX-B-E:~$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 0749:1000 EVer Electronics Corp.
Bus 002 Device 004: ID 1267:0210 Logic3 / SpectraVideo plc LG Optical Mouse 3D-310
Bus 002 Device 005: ID 0d8c:0126 C-Media Electronics, Inc.
edfast@Studio-Z68ITX-B-E:~$ sudo sane-find-scanner
[sudo] password for edfast:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
dvs nu hittade inte heller terminalen bildinläsaren. Är inte detta lite märkligt; ingenting är borttaget, tvärtom har jag utökat antalet paket som skall kunna hantera scanners, med resultatet att det nu ser ut som om jag inte har någon scanner alls? Kör jag nu scanimage -L får jag:
Kod:
edfast@Studio-Z68ITX-B-E:~$ scanimage -L
WARNING: gnome-keyring:: couldn't connect to: /run/user/edfast/keyring-esqwJK/pkcs11: No such file or directory
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
så då gäller min fråga; -vad hände här? Finns det någon idé om hur jag går vidare härifrån, eller vore det bättre att på något sätt försöka återställa situationen där jag åtminstone kunde få maskinen att hitta scannern, om än inte programvaran? Och jo, scannern är tillkopplad och påslagen..
