Visa obesvarade inlägg | Visa aktiva trådar Aktuellt datum och tid: 23 jan 2018, 03:23



Svara på tråd  [ 9 inlägg ] 
 Hjälp med boot 
Författare Meddelande
Användarvisningsbild

Blev medlem: 14 maj 2007, 18:37
Inlägg: 1319
Ort: frankrike
OS: Ubuntu
Svara med citat
Inlägg Hjälp med boot
Kan ni hjälpa?
Detta är överkurs för mig.
Efter uppdatering hände följande,
vid uppstart "fryser" skärmen precis innan den skall ladda Ubuntu 16.04.
Sedan står den still i ca 5 minuter.
Nu tror jag inte att den står still, något gör den ju.
Efter ca 5 minuter kommer den igång.
Vad gör den under tiden?
Jag har fått för mig att den försöker boota men startar på fel disk.
Då behöver den kanske söka hela disken innan den börjar leta på nästa?
Dessutom efter uppstart har den svårt att hitta usb-erna.
Det tar ytterligare några minuter innan allt det är laddat.
Detta är bara en teori som bygger på mitt eget sunda förnuft.
Tyvärr är det inte mycket värt när det gäller sådant här.
Jag har en liten hårddisk där ubuntu är installerat och en större på en gig.
Allt har fungerat tidigare, dock är det inte första gången jag fått detta fel.
Det brukar dock reparera sig efter ett par veckor, efter några uppdateringar.
Alla tips mottages med stor tacksamhet och låt inte min dåliga (?) teori leda er på villospår

Gömt innehåll: Visa!
Disk /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0fb8c46f

Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 1953521663 1953519616 931,5G 83 Linux


Disk /dev/sdb: 119,2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00081d18

Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 233340927 233338880 111,3G 83 Linux
/dev/sdb2 233342974 250068991 16726018 8G 5 Extended
/dev/sdb5 233342976 250068991 16726016 8G 82 Linux swap / Solaris
lasse@lasse-System-Product-Name:~$


06 mar 2017, 23:11
Profil
Användarvisningsbild

Blev medlem: 14 maj 2007, 18:37
Inlägg: 1319
Ort: frankrike
OS: Ubuntu
Svara med citat
Inlägg Re: Hjälp med boot
Kan det finnas ledtåd här? Xorg
Gömt innehåll: Visa!
[ 11.772]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 11.773] X Protocol Version 11, Revision 0
[ 11.773] Build Operating System: Linux 4.4.0-45-generic x86_64 Ubuntu
[ 11.773] Current Operating System: Linux lasse-System-Product-Name 4.4.0-64-generic #85-Ubuntu SMP Mon Feb 20 11:50:30 UTC 2017 x86_64
[ 11.773] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-64-generic root=UUID=963e84e3-f184-460b-958f-2a7f24d25f3a ro quiet splash vt.handoff=7
[ 11.773] Build Date: 02 November 2016 10:06:10PM
[ 11.773] xorg-server 2:1.18.4-0ubuntu0.2 (For technical support please see http://www.ubuntu.com/support)
[ 11.773] Current version of pixman: 0.33.6
[ 11.773] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.773] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.773] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Mar 6 22:28:11 2017
[ 11.773] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.775] (==) No Layout section. Using the first Screen section.
[ 11.775] (==) No screen section available. Using defaults.
[ 11.775] (**) |-->Screen "Default Screen Section" (0)
[ 11.775] (**) | |-->Monitor "<default monitor>"
[ 11.776] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.776] (==) Automatically adding devices
[ 11.776] (==) Automatically enabling devices
[ 11.776] (==) Automatically adding GPU devices
[ 11.776] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.776] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.776] Entry deleted from font path.
[ 11.776] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 11.776] Entry deleted from font path.
[ 11.776] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 11.776] Entry deleted from font path.
[ 11.777] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 11.777] Entry deleted from font path.
[ 11.777] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 11.777] Entry deleted from font path.
[ 11.777] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 11.777] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 11.777] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.777] (II) Loader magic: 0x557c7a231dc0
[ 11.777] (II) Module ABI versions:
[ 11.777] X.Org ANSI C Emulation: 0.4
[ 11.777] X.Org Video Driver: 20.0
[ 11.777] X.Org XInput driver : 22.1
[ 11.777] X.Org Server Extension : 9.0
[ 11.777] (++) using VT number 7

[ 11.777] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11.778] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.779] (--) PCI:*(0:0:2:0) 8086:0122:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 11.779] (II) LoadModule: "glx"
[ 11.780] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.793] (II) Module glx: vendor="X.Org Foundation"
[ 11.793] compiled for 1.18.4, module version = 1.0.0
[ 11.793] ABI class: X.Org Server Extension, version 9.0
[ 11.793] (==) AIGLX enabled
[ 11.793] (==) Matched intel as autoconfigured driver 0
[ 11.793] (==) Matched intel as autoconfigured driver 1
[ 11.793] (==) Matched modesetting as autoconfigured driver 2
[ 11.793] (==) Matched fbdev as autoconfigured driver 3
[ 11.793] (==) Matched vesa as autoconfigured driver 4
[ 11.793] (==) Assigned the driver to the xf86ConfigLayout
[ 11.793] (II) LoadModule: "intel"
[ 11.794] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 11.797] (II) Module intel: vendor="X.Org Foundation"
[ 11.797] compiled for 1.18.4, module version = 2.99.917
[ 11.797] Module class: X.Org Video Driver
[ 11.797] ABI class: X.Org Video Driver, version 20.0
[ 11.797] (II) LoadModule: "modesetting"
[ 11.797] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.798] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.798] compiled for 1.18.4, module version = 1.18.4
[ 11.798] Module class: X.Org Video Driver
[ 11.798] ABI class: X.Org Video Driver, version 20.0
[ 11.798] (II) LoadModule: "fbdev"
[ 11.798] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.799] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.799] compiled for 1.18.1, module version = 0.4.4
[ 11.799] Module class: X.Org Video Driver
[ 11.799] ABI class: X.Org Video Driver, version 20.0
[ 11.799] (II) LoadModule: "vesa"
[ 11.799] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.799] (II) Module vesa: vendor="X.Org Foundation"
[ 11.799] compiled for 1.18.1, module version = 2.3.4
[ 11.799] Module class: X.Org Video Driver
[ 11.799] ABI class: X.Org Video Driver, version 20.0
[ 11.799] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 11.800] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 11.800] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 11.800] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 11.800] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.800] (II) FBDEV: driver for framebuffer: fbdev
[ 11.800] (II) VESA: driver for VESA chipsets: vesa
[ 11.800] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20151010
[ 11.800] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1.2 (Timo Aaltonen <tjaalton@debian.org>)
[ 11.800] (II) intel(0): SNA compiled for use with valgrind
[ 11.802] (WW) Falling back to old probe method for modesetting
[ 11.802] (WW) Falling back to old probe method for fbdev
[ 11.802] (II) Loading sub module "fbdevhw"
[ 11.802] (II) LoadModule: "fbdevhw"
[ 11.802] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 11.802] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 11.802] compiled for 1.18.4, module version = 0.0.2
[ 11.802] ABI class: X.Org Video Driver, version 20.0
[ 11.802] (WW) Falling back to old probe method for vesa
[ 11.803] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 11.803] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[ 11.803] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.803] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 11.803] (==) intel(0): RGB weight 888
[ 11.803] (==) intel(0): Default visual is TrueColor
[ 11.803] (II) intel(0): Output VGA1 has no monitor section
[ 11.803] (II) intel(0): Enabled output VGA1
[ 11.803] (II) intel(0): Output HDMI1 has no monitor section
[ 11.803] (II) intel(0): Enabled output HDMI1
[ 11.803] (II) intel(0): Output DP1 has no monitor section
[ 11.803] (II) intel(0): Enabled output DP1
[ 11.803] (II) intel(0): Output HDMI2 has no monitor section
[ 11.803] (II) intel(0): Enabled output HDMI2
[ 11.803] (II) intel(0): Output HDMI3 has no monitor section
[ 11.803] (II) intel(0): Enabled output HDMI3
[ 11.803] (II) intel(0): Output DP2 has no monitor section
[ 11.803] (II) intel(0): Enabled output DP2
[ 11.803] (II) intel(0): Output DP3 has no monitor section
[ 11.803] (II) intel(0): Enabled output DP3
[ 11.803] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 11.803] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 11.803] (II) intel(0): Enabled output VIRTUAL1
[ 11.803] (--) intel(0): Output HDMI3 using initial mode 1920x1080 on pipe 0
[ 11.803] (==) intel(0): TearFree disabled
[ 11.803] (==) intel(0): DPI set to (96, 96)
[ 11.803] (II) Loading sub module "dri2"
[ 11.803] (II) LoadModule: "dri2"
[ 11.803] (II) Module "dri2" already built-in
[ 11.803] (II) Loading sub module "present"
[ 11.803] (II) LoadModule: "present"
[ 11.803] (II) Module "present" already built-in
[ 11.803] (II) UnloadModule: "modesetting"
[ 11.803] (II) Unloading modesetting
[ 11.803] (II) UnloadModule: "fbdev"
[ 11.803] (II) Unloading fbdev
[ 11.803] (II) UnloadSubModule: "fbdevhw"
[ 11.803] (II) Unloading fbdevhw
[ 11.804] (II) UnloadModule: "vesa"
[ 11.804] (II) Unloading vesa
[ 11.804] (==) Depth 24 pixmap format is 32 bpp
[ 11.809] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[ 11.809] (==) intel(0): Backing store enabled
[ 11.809] (==) intel(0): Silken mouse enabled
[ 11.810] (II) intel(0): HW Cursor enabled
[ 11.810] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.811] (==) intel(0): DPMS enabled
[ 11.811] (==) intel(0): Display hotplug detection enabled
[ 11.811] (II) intel(0): [DRI2] Setup complete
[ 11.811] (II) intel(0): [DRI2] DRI driver: i965
[ 11.811] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 11.811] (II) intel(0): direct rendering: DRI2 enabled
[ 11.811] (II) intel(0): hardware support for Present enabled
[ 11.811] (--) RandR disabled
[ 11.814] (II) SELinux: Disabled on system
[ 11.842] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 11.842] (II) AIGLX: enabled GLX_ARB_create_context
[ 11.842] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 11.842] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 11.842] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 11.842] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 11.842] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 11.842] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 11.842] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 11.842] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 11.842] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 11.842] (II) AIGLX: Loaded and initialized i965
[ 11.842] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 11.845] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI3 using pipe 0, position (0, 0), rotation normal, reflection none
[ 11.845] (II) intel(0): Setting screen physical size to 508 x 285
[ 11.874] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.874] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.874] (II) LoadModule: "evdev"
[ 11.874] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.876] (II) Module evdev: vendor="X.Org Foundation"
[ 11.876] compiled for 1.18.1, module version = 2.10.1
[ 11.876] Module class: X.Org XInput Driver
[ 11.876] ABI class: X.Org XInput driver, version 22.1
[ 11.876] (II) Using input driver 'evdev' for 'Power Button'
[ 11.876] (**) Power Button: always reports core events
[ 11.876] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 11.876] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.876] (--) evdev: Power Button: Found keys
[ 11.876] (II) evdev: Power Button: Configuring as keyboard
[ 11.876] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 11.876] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.876] (**) Option "xkb_rules" "evdev"
[ 11.876] (**) Option "xkb_model" "pc105"
[ 11.876] (**) Option "xkb_layout" "se"
[ 11.888] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 11.888] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 11.888] (II) Using input driver 'evdev' for 'Video Bus'
[ 11.888] (**) Video Bus: always reports core events
[ 11.888] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 11.888] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 11.888] (--) evdev: Video Bus: Found keys
[ 11.888] (II) evdev: Video Bus: Configuring as keyboard
[ 11.888] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event2"
[ 11.888] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 11.888] (**) Option "xkb_rules" "evdev"
[ 11.888] (**) Option "xkb_model" "pc105"
[ 11.888] (**) Option "xkb_layout" "se"
[ 11.888] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.888] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.888] (II) Using input driver 'evdev' for 'Power Button'
[ 11.888] (**) Power Button: always reports core events
[ 11.888] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 11.888] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.888] (--) evdev: Power Button: Found keys
[ 11.888] (II) evdev: Power Button: Configuring as keyboard
[ 11.888] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 11.888] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 11.888] (**) Option "xkb_rules" "evdev"
[ 11.888] (**) Option "xkb_model" "pc105"
[ 11.888] (**) Option "xkb_layout" "se"
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event7)
[ 11.889] (II) No input driver specified, ignoring this device.
[ 11.889] (II) This device may have been added with another device file.
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[ 11.889] (II) No input driver specified, ignoring this device.
[ 11.889] (II) This device may have been added with another device file.
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
[ 11.889] (II) No input driver specified, ignoring this device.
[ 11.889] (II) This device may have been added with another device file.
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event10)
[ 11.889] (II) No input driver specified, ignoring this device.
[ 11.889] (II) This device may have been added with another device file.
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event11)
[ 11.889] (II) No input driver specified, ignoring this device.
[ 11.889] (II) This device may have been added with another device file.
[ 11.889] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 11.890] (II) No input driver specified, ignoring this device.
[ 11.890] (II) This device may have been added with another device file.
[ 11.890] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 11.890] (II) No input driver specified, ignoring this device.
[ 11.890] (II) This device may have been added with another device file.
[ 11.890] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event5)
[ 11.890] (II) No input driver specified, ignoring this device.
[ 11.890] (II) This device may have been added with another device file.
[ 11.890] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 11.890] (II) No input driver specified, ignoring this device.
[ 11.890] (II) This device may have been added with another device file.
[ 11.890] (II) config/udev: Adding input device USBPS2 (/dev/input/event3)
[ 11.890] (**) USBPS2: Applying InputClass "evdev keyboard catchall"
[ 11.890] (II) Using input driver 'evdev' for 'USBPS2'
[ 11.890] (**) USBPS2: always reports core events
[ 11.890] (**) evdev: USBPS2: Device: "/dev/input/event3"
[ 11.890] (--) evdev: USBPS2: Vendor 0xd3d Product 0x1
[ 11.890] (--) evdev: USBPS2: Found keys
[ 11.890] (II) evdev: USBPS2: Configuring as keyboard
[ 11.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0D3D:0001.0001/input/input6/event3"
[ 11.890] (II) XINPUT: Adding extended input device "USBPS2" (type: KEYBOARD, id 9)
[ 11.890] (**) Option "xkb_rules" "evdev"
[ 11.891] (II) config/udev: Adding input device USBPS2 (/dev/input/event4)
[ 11.891] (**) USBPS2: Applying InputClass "evdev pointer catchall"
[ 11.891] (**) USBPS2: Applying InputClass "evdev keyboard catchall"
[ 11.891] (II) Using input driver 'evdev' for 'USBPS2'
[ 11.891] (**) USBPS2: always reports core events
[ 11.891] (**) evdev: USBPS2: Device: "/dev/input/event4"
[ 11.891] (--) evdev: USBPS2: Vendor 0xd3d Product 0x1
[ 11.891] (--) evdev: USBPS2: Found 9 mouse buttons
[ 11.891] (--) evdev: USBPS2: Found scroll wheel(s)
[ 11.891] (--) evdev: USBPS2: Found relative axes
[ 11.891] (--) evdev: USBPS2: Found x and y relative axes
[ 11.891] (--) evdev: USBPS2: Found absolute axes
[ 11.891] (II) evdev: USBPS2: Forcing absolute x/y axes to exist.
[ 11.891] (--) evdev: USBPS2: Found keys
[ 11.891] (II) evdev: USBPS2: Configuring as mouse
[ 11.891] (II) evdev: USBPS2: Configuring as keyboard
[ 11.891] (II) evdev: USBPS2: Adding scrollwheel support
[ 11.891] (**) evdev: USBPS2: YAxisMapping: buttons 4 and 5
[ 11.891] (**) evdev: USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:0D3D:0001.0002/input/input7/event4"
[ 11.891] (II) XINPUT: Adding extended input device "USBPS2" (type: KEYBOARD, id 10)
[ 11.891] (**) Option "xkb_rules" "evdev"
[ 11.891] (II) evdev: USBPS2: initialized for relative axes.
[ 11.891] (WW) evdev: USBPS2: ignoring absolute axes.
[ 11.891] (**) USBPS2: (accel) keeping acceleration scheme 1
[ 11.891] (**) USBPS2: (accel) acceleration profile 0
[ 11.891] (**) USBPS2: (accel) acceleration factor: 2.000
[ 11.891] (**) USBPS2: (accel) acceleration threshold: 4
[ 11.891] (II) config/udev: Adding input device USBPS2 (/dev/input/mouse0)
[ 11.891] (II) No input driver specified, ignoring this device.
[ 11.891] (II) This device may have been added with another device file.
[ 11.892] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
[ 11.892] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 11.892] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 11.892] (**) Eee PC WMI hotkeys: always reports core events
[ 11.892] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event14"
[ 11.892] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 11.892] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 11.892] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 11.892] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input17/event14"
[ 11.892] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 11.892] (**) Option "xkb_rules" "evdev"
[ 11.892] (**) Option "xkb_model" "pc105"
[ 11.892] (**) Option "xkb_layout" "se"
[ 13.517] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 13.580] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 13.646] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 63.690] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 65.574] (II) config/udev: Adding input device USBPS2 (/dev/input/mouse0)
[ 65.574] (II) No input driver specified, ignoring this device.
[ 65.574] (II) This device may have been added with another device file.
[ 65.579] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 65.579] (II) No input driver specified, ignoring this device.
[ 65.579] (II) This device may have been added with another device file.
[ 65.589] (WW) config/udev: device USBPS2 already added. Ignoring.
[ 65.597] (WW) config/udev: device USBPS2 already added. Ignoring.
[ 65.699] (II) config/udev: Adding input device Logitech M570 (/dev/input/mouse2)
[ 65.699] (II) No input driver specified, ignoring this device.
[ 65.699] (II) This device may have been added with another device file.
[ 65.709] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event15)
[ 65.709] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 65.709] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 65.709] (**) USB Optical Mouse: always reports core events
[ 65.709] (**) evdev: USB Optical Mouse: Device: "/dev/input/event15"
[ 65.765] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 65.765] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 65.765] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 65.765] (--) evdev: USB Optical Mouse: Found relative axes
[ 65.765] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 65.765] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 65.765] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 65.765] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 65.765] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 65.765] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:1BCF:0005.0003/input/input18/event15"
[ 65.765] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12)
[ 65.765] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 65.765] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 65.765] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 65.765] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 65.765] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 65.766] (II) config/udev: Adding input device Logitech M570 (/dev/input/event16)
[ 65.766] (**) Logitech M570: Applying InputClass "evdev pointer catchall"
[ 65.766] (II) Using input driver 'evdev' for 'Logitech M570'
[ 65.766] (**) Logitech M570: always reports core events
[ 65.766] (**) evdev: Logitech M570: Device: "/dev/input/event16"
[ 65.788] (--) evdev: Logitech M570: Vendor 0x46d Product 0x1028
[ 65.788] (--) evdev: Logitech M570: Found 20 mouse buttons
[ 65.788] (--) evdev: Logitech M570: Found scroll wheel(s)
[ 65.788] (--) evdev: Logitech M570: Found relative axes
[ 65.788] (--) evdev: Logitech M570: Found x and y relative axes
[ 65.788] (II) evdev: Logitech M570: Configuring as mouse
[ 65.788] (II) evdev: Logitech M570: Adding scrollwheel support
[ 65.788] (**) evdev: Logitech M570: YAxisMapping: buttons 4 and 5
[ 65.788] (**) evdev: Logitech M570: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 65.788] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.3/2-1.3.3:1.2/0003:046D:C52B.0006/0003:046D:1028.0007/input/input19/event16"
[ 65.788] (II) XINPUT: Adding extended input device "Logitech M570" (type: MOUSE, id 13)
[ 65.788] (II) evdev: Logitech M570: initialized for relative axes.
[ 65.788] (**) Logitech M570: (accel) keeping acceleration scheme 1
[ 65.788] (**) Logitech M570: (accel) acceleration profile 0
[ 65.788] (**) Logitech M570: (accel) acceleration factor: 2.000
[ 65.788] (**) Logitech M570: (accel) acceleration threshold: 4
[ 65.789] (II) config/udev: Adding input device HD Pro Webcam C920 (/dev/input/event17)
[ 65.789] (**) HD Pro Webcam C920: Applying InputClass "evdev keyboard catchall"
[ 65.789] (II) Using input driver 'evdev' for 'HD Pro Webcam C920'
[ 65.789] (**) HD Pro Webcam C920: always reports core events
[ 65.789] (**) evdev: HD Pro Webcam C920: Device: "/dev/input/event17"
[ 65.789] (--) evdev: HD Pro Webcam C920: Vendor 0x46d Product 0x82d
[ 65.789] (--) evdev: HD Pro Webcam C920: Found keys
[ 65.789] (II) evdev: HD Pro Webcam C920: Configuring as keyboard
[ 65.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input20/event17"
[ 65.789] (II) XINPUT: Adding extended input device "HD Pro Webcam C920" (type: KEYBOARD, id 14)
[ 65.789] (**) Option "xkb_rules" "evdev"
[ 65.789] (**) Option "xkb_model" "pc105"
[ 65.789] (**) Option "xkb_layout" "se"
[ 65.789] (WW) Option "xkb_variant" requires a string value
[ 65.789] (WW) Option "xkb_options" requires a string value
[ 529.462] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 544.814] (--) intel(0): HDMI max TMDS frequency 225000KHz
[ 1575.561] (II) config/udev: removing device USB Optical Mouse
[ 1575.576] (II) evdev: USB Optical Mouse: Close
[ 1575.576] (II) UnloadModule: "evdev"
[ 1581.759] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1)
[ 1581.759] (II) No input driver specified, ignoring this device.
[ 1581.759] (II) This device may have been added with another device file.
[ 1581.822] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event15)
[ 1581.822] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1581.822] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 1581.822] (**) USB Optical Mouse: always reports core events
[ 1581.822] (**) evdev: USB Optical Mouse: Device: "/dev/input/event15"
[ 1581.896] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 1581.896] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 1581.896] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 1581.896] (--) evdev: USB Optical Mouse: Found relative axes
[ 1581.896] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 1581.896] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 1581.896] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 1581.896] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1581.896] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1581.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3.2/2-1.3.2:1.0/0003:1BCF:0005.0008/input/input21/event15"
[ 1581.896] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 12)
[ 1581.896] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 1581.897] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1581.897] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 1581.897] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1581.897] (**) USB Optical Mouse: (accel) acceleration threshold: 4


06 mar 2017, 23:32
Profil
Användarvisningsbild

Blev medlem: 14 maj 2007, 18:37
Inlägg: 1319
Ort: frankrike
OS: Ubuntu
Svara med citat
Inlägg Re: Hjälp med boot
Min teori fel.
Vet ej varför detta fel uppstått.
Har extern 2 gig hårddisk.
Den hittades överhuvudtaget inte.
Jag kopplade ur den vid uppstart.
Ubuntu startar som vanligt oc inga problem.
Jag kopplar in hårddisk-hittas.
Varför det blir så här vet jag inte, men det är ju en enkel lösning på ett gammalt
problem jag haft.


07 mar 2017, 09:14
Profil
Användarvisningsbild

Blev medlem: 11 maj 2012, 17:33
Inlägg: 5
Ort: Eskilstuna
OS: Kubuntu
Svara med citat
Inlägg Re: Hjälp med boot
Alltså, låter som du har alldeles för lite utrymme. Inte för att jag tror det har nåt med saken att göra. Visst att linux tar avsevärt mindre plats, tror jag ubuntu är fel dist med så lite utrymme. Du borde satsa på nåt vädigt lättviktigt

Skickat från min LG-H850 via Tapatalk

_________________
blah blah blah (-X


07 mar 2017, 14:44
Profil
Användarvisningsbild

Blev medlem: 11 maj 2012, 17:33
Inlägg: 5
Ort: Eskilstuna
OS: Kubuntu
Svara med citat
Inlägg Re: Hjälp med boot
https://help.ubuntu.com/community/Insta ... quirements

Skickat från min LG-H850 via Tapatalk

_________________
blah blah blah (-X


07 mar 2017, 14:47
Profil
Serveradmin
Användarvisningsbild

Blev medlem: 22 okt 2006, 08:13
Inlägg: 3562
Ort: Svedala
OS: Ubuntu
Utgåva: 17.04 Zesty Zapus
Svara med citat
Inlägg Re: Hjälp med boot
Nja, disk *verkar* du ha - du har blandat ihop GB och TB, men du har alltså en 931GB stor disk, så du *borde* inte ha några problem med diskutrymme (såvida du inte har lyckats skapa väldigt många/stora filer som tar mycket plats). Men det borde kommandot
Kod:
df -h
kunna berätta för oss.

Grafikproblem kan uppstå ur flera olika situationer, så vi får utesluta det ena efter det andra. Vad ger kommandot
Kod:
dmesg
?
Jag antar att de virtuella konsolerna fungerar (tangentbordskombination Alt+CTRL+ F1 / F2 / F3..... / F7)? Om inte; hur har du då fått tag i den logginformation du redan har bifogat i den här tråden?


07 mar 2017, 15:48
Profil WWW
Användarvisningsbild

Blev medlem: 14 maj 2007, 18:37
Inlägg: 1319
Ort: frankrike
OS: Ubuntu
Svara med citat
Inlägg Re: Hjälp med boot
Ja jag menade naturligtvis 2 TB :)
df -h
Gömt innehåll: Visa!
lasse@lasse-System-Product-Name:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 3,9G 0 3,9G 0% /dev
tmpfs 789M 9,9M 780M 2% /run
/dev/sdb1 110G 51G 54G 49% /
tmpfs 3,9G 1,9M 3,9G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 3,9G 0 3,9G 0% /sys/fs/cgroup
/dev/loop1 76M 76M 0 100% /snap/core/1337
/dev/loop0 76M 76M 0 100% /snap/core/1287
/dev/loop3 56M 56M 0 100% /snap/laidout/3
/dev/loop2 77M 77M 0 100% /snap/core/1264
cgmfs 100K 0 100K 0% /run/cgmanager/fs
tmpfs 789M 116K 789M 1% /run/user/1000
/dev/sdc1 1,8T 720G 1022G 42% /media/lasse/b4ba3037-ea2d-4318-8b7b-412e1d86a1a32
lasse@lasse-System-Product-Name:~$


07 mar 2017, 16:00
Profil
Användarvisningsbild

Blev medlem: 14 maj 2007, 18:37
Inlägg: 1319
Ort: frankrike
OS: Ubuntu
Svara med citat
Inlägg Re: Hjälp med boot
Som jag skrev i "svar" till mig själv dvs innan någon yttrat sig i tråden så fungerar allt normalt nu.
Den externa hårddisken skapade tydligen någon konflikt.
När den kopplades ur vid uppstart så var boottiden normal och alla usb laddades.
efter uppstart och anslutning hittas extern hårddisk direkt och allt är normalt. även vid omstart.
Tack salkcin för ditt intresse, ditt svar beror säkert på att jag skrev fel 2 gb istället för tb.
Ang. diskar
jag har en snabb (ssd? ellere vad heter det?) på 140 gig, tror jag
där är det tänkt att ubuntu skall ligga och boot skall ske därifrån, tror jag
sedan har jag en vanlig hårddisk på 1 tb och en extern på 2tb

Johanre... allt funkar, finns det något att gå vidare med?
Tack, tack


07 mar 2017, 16:14
Profil
Serveradmin
Användarvisningsbild

Blev medlem: 22 okt 2006, 08:13
Inlägg: 3562
Ort: Svedala
OS: Ubuntu
Utgåva: 17.04 Zesty Zapus
Svara med citat
Inlägg Re: Hjälp med boot
lasseroth skrev:
Johanre... allt funkar, finns det något att gå vidare med?


Nejdå, bara bra att du lyckades lösa det. 8)


12 mar 2017, 13:30
Profil WWW
Visa inlägg nyare än:  Sortera efter  
Svara på tråd   [ 9 inlägg ] 

Vilka är online

Användare som besöker denna kategori: Inga registrerade användare och 1 gäst


Du kan inte skapa nya trådar i denna kategori
Du kan inte svara på trådar i denna kategori
Du kan inte redigera dina inlägg i denna kategori
Du kan inte ta bort dina inlägg i denna kategori
Du kan inte bifoga filer i denna kategori

Sök efter:
Hoppa till:  
Main Engineer for phpBB3: Bertie at phpBB.com © 2000 - 2002, 2005 - 2007, the Group behind the Open Source code of phpBB.
Designed by STSoftware, modified by Katt, Konservburk & Peetra. Swedish translation by Peetra & phpBB Sweden © 2006-2011